[{"@context":"http:\/\/schema.org\/","@type":"BlogPosting","@id":"https:\/\/wiki.edu.vn\/en\/wiki24\/constraint-computer-aided-design-wikipedia\/#BlogPosting","mainEntityOfPage":"https:\/\/wiki.edu.vn\/en\/wiki24\/constraint-computer-aided-design-wikipedia\/","headline":"Constraint (computer-aided design) – Wikipedia","name":"Constraint (computer-aided design) – Wikipedia","description":"before-content-x4 Imposed limitations in computer-aided design The shaft and pulleys share a common centerline. The constraints of the key are","datePublished":"2014-10-18","dateModified":"2014-10-18","author":{"@type":"Person","@id":"https:\/\/wiki.edu.vn\/en\/wiki24\/author\/lordneo\/#Person","name":"lordneo","url":"https:\/\/wiki.edu.vn\/en\/wiki24\/author\/lordneo\/","image":{"@type":"ImageObject","@id":"https:\/\/secure.gravatar.com\/avatar\/c9645c498c9701c88b89b8537773dd7c?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/c9645c498c9701c88b89b8537773dd7c?s=96&d=mm&r=g","height":96,"width":96}},"publisher":{"@type":"Organization","name":"Enzyklop\u00e4die","logo":{"@type":"ImageObject","@id":"https:\/\/wiki.edu.vn\/wiki4\/wp-content\/uploads\/2023\/08\/download.jpg","url":"https:\/\/wiki.edu.vn\/wiki4\/wp-content\/uploads\/2023\/08\/download.jpg","width":600,"height":60}},"image":{"@type":"ImageObject","@id":"https:\/\/upload.wikimedia.org\/wikipedia\/commons\/f\/fa\/Shaft_animation.gif","url":"https:\/\/upload.wikimedia.org\/wikipedia\/commons\/f\/fa\/Shaft_animation.gif","height":"120","width":"180"},"url":"https:\/\/wiki.edu.vn\/en\/wiki24\/constraint-computer-aided-design-wikipedia\/","wordCount":3456,"articleBody":"     (adsbygoogle = window.adsbygoogle || []).push({});before-content-x4Imposed limitations in computer-aided design  The shaft and pulleys share a common centerline. The constraints of the key are set in relation to the keyseat.       (adsbygoogle = window.adsbygoogle || []).push({});after-content-x4A constraint in computer-aided design (CAD) software is a limitation or restriction imposed by a designer or an engineer upon geometric properties[1]:\u200a203\u200a of an entity of a design model that maintains its structure as the model is manipulated. These properties can include relative length, angle, orientation, size, shift, and displacement.[2] The plural form constraints refers to demarcations of geometrical characteristics between two or more entities or solid modeling bodies; these delimiters are definitive for properties of theoretical physical position and motion, or displacement in parametric design. The exact terminology, however, may vary depending on a CAD program vendor.Constraints are widely employed in CAD software for solid modeling, computer-aided architectural design such as building information modeling, computer-aided engineering, assembly modeling, and other CAD subfields.[2] Constraints are usually used for the creation of 3D assemblies and multibody systems.[2]       (adsbygoogle = window.adsbygoogle || []).push({});after-content-x4A constraint may be specified for two or more entities at once. For instance, two lines may be constrained to have equal length or diameter of circles can be set to have the same dimension (e.g., radius or length). Moreover, the constraint may be applied to solid models to be locked or fixed in a specified space. Concept of constraints is applicable for both two- (2D) three-dimensional (3D) sketches (including the ones used to create extrusions and solid bodies).The concept of constraints initially emerged in the 1960s and were further developed in the 1970-80s.Table of Contents       (adsbygoogle = window.adsbygoogle || []).push({});after-content-x4History[edit]Overview[edit]Degrees of freedom[edit]Geometric constraints[edit]Parametrics[edit]Assembly constraints[edit]Implementations[edit]Geometric constraint solving[edit]Example[edit]See also[edit]References[edit]Sources[edit]History[edit]The original idea of “constraints” was introduced by Ivan Sutherland in 1975. It is derived from ideas employed in Sketchpad system made in 1963.[3]:\u200a29\u200a In his work he argued that the usefulness of a technical drawing made by a computer program relied on their structured nature. Compared to traditional drawings that lack this feature the virtual ones had advantages in keeping track of and recalculating dimensions of entities (lines, angles, areas etc.). These ideas were integrated into a CAD system that maintained this structure as a designer manipulated geometric model.[3]:\u200a29\u200aIn the 1970s the idea was further extended into three-dimensional space. In the 80s, a more generalized constraint-based programming language approach emerged and found some application in CAD software.[4] At least one conceptual prototype was built in 1989.[3]:\u200a29\u200aOverview[edit]The purpose of constraints in a design is to control and limit the behavior of the entities and bodies in relation to another entity, plane or body.[1]:\u200a203\u200a Effective constraints or mates between two or more bodies may exist at the assembly level of these or between two or more entities in defining a sketch, but adding conflicting, unnecessary or redundant constraints may result in an overdefined sketch and an error message.Degrees of freedom[edit]Development of a good constraining system might be a time-consuming process.[1]:\u200a206\u200a One approach to this situation may be referred as removing degrees of freedom (DOF). The latter are often represented by (X,Y,Z) coordinates in space.[1]:\u200a206\u200a The designer may quickly figure out whether an entity is constrained or not by counting the number of DOFs removed from it.[1]:\u200a206\u200aGeometric constraints[edit]There are several constraints that may be applied between entities or bodies depending on their actual natural geometry (may also be referred to as \u2019\u2019mates\u2019\u2019): collinearity, perpendicularity, tangency, symmetry, coincidency, and parallelism are ways of establishing the orientation of the entity.[5][1]:\u200a203\u200aVarious types of constraints[1]:\u200a208\u200aTypeApplied toActionExamplesCoincidentPoints, Circle, ArcsForces several points from separate geometric entities to share the same coordinate in space (e.g. X, Y, Z); as one point is being moved, all others match its coordinate changesPoints of 2 lines; center of a circle and a lineParallelLinesForces two straight lines to be parallelPerpendicularLinesForces two straight lines to be perpendicular to each otherCollinearLinesForces two lines to lie on the same mathematical line or planeGrounded, Fixed, or RigidifiedPoints, LinesForces lines or points not to moveTangentLinesForces the 2 entities to touch such that they share exactly one pointA line tangent to an arc in an involute gearDimensionsPoints, Lines, Arcs etc.Forces various entities to maintain a certain values expressed in a chosen unit; dimensions may be marked as reference dimension by a REF or parenthesis mark [1]:\u200a209\u200aAngle between two lines; distance between point and line; fixed radius or arc lengthParametrics[edit]More advanced 2D\/3D CAD systems may allow application of mathematical relationships between constraints that help to save time on reshaping a model.[1]:\u200a212\u200a By way of parametrics a complicated sketch can be adjusted in matters of seconds in predictable ways by only changing one or a few basic dimensions saving a fair amount of working time. Such systems are usually referred as parametric as they create parametric models. Parametrics may also be referred as a design intent, varying geometry, family tables, or as driving dimensions.[1]:\u200a213\u200aAssembly constraints[edit]In assembly modeling, constraints are widely used to control or restrict design parts movements or relationships between each other. Some constraints forces models to respond to changes made in a separate part of a designed product. This enables the design to be responsive as a whole.[1]:\u200a251\u200aVarious types of assembly contraints.[1]:\u200a253\u200aTypeDescriptionDimension between two planesRemoves translational and 2 rotational DOFDimension between one plane and 1 straight edgeRemoves one translational and one rotational DOFDimension between one plane and 1 pointRemoves one translational DOFParallelism between two planesRemoves 2 rotation DOF; force planar faces to be parallelParallelism between two straight edgesPerpendicularity between 2 planesCoincident and colinear straight edgesForces two edges to slide along each otherTangency between a curved face and a planeRemoves one translational DOF and one rotational DOF; allows the part instance with the curved surface to roll along the flat plane.\u201cGrounding\u201d or \u201cRigidifying\u201d one part relative to anotherForces constrained bodies to move as one rigid entityGrounding or Rigidifying one part relative to a global originRemoves all DOFs at once; locks to a global originImplementations[edit]Implementation of constraints functionality vary with given CAD system and may respond differently to how user applies them. When constraints are added into a sketch some system may be smart enough to apply additional ones based on pre-existing entities automatically. For instance, if the line is drawn next to another one the system may figure to constrain them into being in parallel relative to each other. This sometimes, however, may lead to unexpected results.[1]:\u200a206\u200aGeometric constraint solving[edit]Constraint solver is a dedicated software that calculates positions of points of the 2D sketch based on geometric constraint specified by the user. The purpose of the constraint solver is to find all points’ positions with respect to the said constraints. It also usually helps with identifying issues with constraining such as over-constraining etc. so the entire sketch is stable.[1]:\u200a209\u20132013\u200aExample[edit]Ideally, a rod will need to be concentric to a hole drilled through the plate where it will be inserted, so the constraint “concentric” guarantees that the diameter of the rod and the diameter of the hole maintain a common centerline, thus “locking” the manner the rod relates to the hole in the plate; this means that the rod could still slide on either direction since the position of its ends has not been limited. Instance 2 illustrates that the rod may still rotate along its centerline while it slides up or down.  Concentric mating of cylinders, shafts, or rods to a plate.See also[edit]References[edit]^ a b c d e f g h i j k l m n Schoonmaker, Stephen J. (2003). The CAD guidebook\u00a0: a basic manual for understanding and improving computer-aided design. New York: Marcel Dekker. ISBN\u00a00-8247-0871-7. OCLC\u00a050868192.^ a b c The Electronic design studio\u00a0: architectural knowledge and media in the computer era. Malcolm McCullough, William J. Mitchell, Patrick Purcell. Cambridge, Mass.: MIT Press. 1990. ISBN\u00a00-262-13254-0. OCLC\u00a020692928.{{cite book}}:  CS1 maint: others (link)^ a b c J. Mitchell, William (1989). “A New Agenda For Computer-Aided Architectural Design”. Massachusetts, US: Harvard University Graduate School of Design.{{cite web}}:  CS1 maint: url-status (link)^ Craig, Iain (January 1989). “Constraint Programming Languages: Their Specification And Generation by Wm Leler Addison-Wesley, Reading MA, 1988, 202 pages (incl. index) (\u00a324.95)”. Robotica. 7 (1): 85. doi:10.1017\/S026357470000521X. ISSN\u00a00263-5747.^ “Understanding Geometric Constraints – AutoCAD\u00ae 2012 FOR DUMMIES\u00ae [Book]”. www.oreilly.com. Retrieved 2022-02-12.Sources[edit]Introducing AutoCAD 2010 and AutoCAD LT 2010 (pages 117-122), by George Omura. 2009; 1st. Edition. Wiley Publishing, Inc., Indianapolis, Indiana. ISBN\u00a0978-0-470-43867-1 Hard Cover; 384 pages.Autodesk\u00ae Inventor\u00ae 2011 Essentials Plus (pages 312-341), by Daniel T. Banach; Travis Jones; Alan J. Kalameja. 2011; Delmar\/Cengage Learning, Autodesk Press. Printed in the United States of America. ISBN\u00a0978-1-1111-3527-0; ISBN\u00a01-1111-3527-4. New York.     (adsbygoogle = window.adsbygoogle || []).push({});after-content-x4"},{"@context":"http:\/\/schema.org\/","@type":"BreadcrumbList","itemListElement":[{"@type":"ListItem","position":1,"item":{"@id":"https:\/\/wiki.edu.vn\/en\/wiki24\/#breadcrumbitem","name":"Enzyklop\u00e4die"}},{"@type":"ListItem","position":2,"item":{"@id":"https:\/\/wiki.edu.vn\/en\/wiki24\/constraint-computer-aided-design-wikipedia\/#breadcrumbitem","name":"Constraint (computer-aided design) – Wikipedia"}}]}]