Laguerre plane – Wikipedia

before-content-x4

In mathematics, a Laguerre plane is one of the three types of Benz plane, which are the Möbius plane, Laguerre plane and Minkowski plane. Laguerre planes are named after the French mathematician Edmond Nicolas Laguerre.

classical Laguerre plane: 2d/3d-model
after-content-x4

The classical Laguerre plane is an incidence structure that describes the incidence behaviour of the curves

y=ax2+bx+c{displaystyle y=ax^{2}+bx+c}

, i.e. parabolas and lines, in the real affine plane. In order to simplify the structure, to any curve

y=ax2+bx+c{displaystyle y=ax^{2}+bx+c}

the point

(,a){displaystyle (infty ,a)}

is added. A further advantage of this completion is that the plane geometry of the completed parabolas/lines is isomorphic to the geometry of the plane sections of a cylinder (see below).

The classical real Laguerre plane[edit]

Originally the classical Laguerre plane was defined as the geometry of the oriented lines and circles in the real Euclidean plane (see [1]). Here we prefer the parabola model of the classical Laguerre plane.

We define:

P:=R2({}×R), R,{displaystyle {mathcal {P}}:=mathbb {R} ^{2}cup ({infty }times mathbb {R} ), infty notin mathbb {R} ,}

the set of points,

Z:={{(x,y)R2y=ax2+bx+c}{(,a)}a,b,cR}{displaystyle {mathcal {Z}}:={{(x,y)in mathbb {R} ^{2}mid y=ax^{2}+bx+c}cup {(infty ,a)}mid a,b,cin mathbb {R} }}

the set of cycles.

The incidence structure

(P,Z,){displaystyle ({mathcal {P}},{mathcal {Z}},in )}

is called classical Laguerre plane.

The point set is

R2{displaystyle mathbb {R} ^{2}}

plus a copy of

R{displaystyle mathbb {R} }

(see figure). Any parabola/line

y=ax2+bx+c{displaystyle y=ax^{2}+bx+c}

gets the additional point

(,a){displaystyle (infty ,a)}

.

Points with the same x-coordinate cannot be connected by curves

y=ax2+bx+c{displaystyle y=ax^{2}+bx+c}

. Hence we define:

Two points

A,B{displaystyle A,B}

are parallel (

AB{displaystyle Aparallel B}

)
if

A=B{displaystyle A=B}

or there is no cycle containing

A{displaystyle A}

and

B{displaystyle B}

.

For the description of the classical real Laguerre plane above two points

(a1,a2),(b1,b2){displaystyle (a_{1},a_{2}),(b_{1},b_{2})}

are parallel if and only if

a1=b1{displaystyle a_{1}=b_{1}}

.

{displaystyle parallel }

is an equivalence relation, similar to the parallelity of lines.

The incidence structure

(P,Z,){displaystyle ({mathcal {P}},{mathcal {Z}},in )}

has the following properties:

Lemma:

  • For any three points
  • For any point
  • For any cycle

Laguerre-plane: stereographic projection of the x-z-plane onto a cylinder

Similar to the sphere model of the classical Moebius plane there is a cylinder model for the classical Laguerre plane:

(P,Z,){displaystyle ({mathcal {P}},{mathcal {Z}},in )}

is isomorphic to the geometry of plane sections of a circular cylinder in

R3{displaystyle mathbb {R} ^{3}}

.

The following mapping

Φ{displaystyle Phi }

is a projection with center

(0,1,0){displaystyle (0,1,0)}

that maps the x-z-plane onto the cylinder with the equation

u2+v2v=0{displaystyle u^{2}+v^{2}-v=0}

, axis

(0,12,..){displaystyle (0,{tfrac {1}{2}},..)}

and radius

r=12 :{displaystyle r={tfrac {1}{2}} :}

  • The points
  • A line(a=0) is mapped onto a circle/Ellipse through center

The axioms of a Laguerre plane[edit]

The Lemma above gives rise to the following definition:

Let

L:=(P,Z,){displaystyle {mathcal {L}}:=({mathcal {P}},{mathcal {Z}},in )}

be an incidence structure with point set

P{displaystyle {mathcal {P}}}

and set of cycles

Z{displaystyle {mathcal {Z}}}

.
Two points

A,B{displaystyle A,B}

are parallel (

AB{displaystyle Aparallel B}

) if

A=B{displaystyle A=B}

or there is no cycle containing

A{displaystyle A}

and

B{displaystyle B}

.

L{displaystyle {mathcal {L}}}

is called Laguerre plane if the following axioms hold:

B1: For any three points
B2: For any point
B3: For any cycle
i.e.
B4: Any cycle contains at least three points. There is at least one cycle. There are at least four points not on a cycle.

Four points

A,B,C,D{displaystyle A,B,C,D}

are concyclic if there is a cycle

z{displaystyle z}

with

A,B,C,Dz{displaystyle A,B,C,Din z}

.

From the definition of relation

{displaystyle parallel }

and axiom B2 we get

Lemma:
Relation

{displaystyle parallel }

is an equivalence relation.

Following the cylinder model of the classical Laguerre-plane we introduce the denotation:

a) For

PP{displaystyle Pin {mathcal {P}}}

we set

P¯:={QP | PQ}{displaystyle {overline {P}}:={Qin {mathcal {P}} | Pparallel Q}}

.
b) An equivalence class

P¯{displaystyle {overline {P}}}

is called generator.

For the classical Laguerre plane a generator is a line parallel to the y-axis (plane model) or a line on the cylinder (space model).

The connection to linear geometry is given by the following definition:

For a Laguerre plane

L:=(P,Z,){displaystyle {mathcal {L}}:=({mathcal {P}},{mathcal {Z}},in )}

we define the local structure

and call it the residue at point P.

In the plane model of the classical Laguerre plane

A{displaystyle {mathcal {A}}_{infty }}

is the real affine plane

R2{displaystyle mathbb {R} ^{2}}

.
In general we get

Theorem: Any residue of a Laguerre plane is an affine plane.

And the equivalent definition of a Laguerre plane:

Theorem:
An incidence structure together with an equivalence relation

{displaystyle parallel }

on

P{displaystyle {mathcal {P}}}

is a
Laguerre plane if and only if for any point

P{displaystyle P}

the residue

AP{displaystyle {mathcal {A}}_{P}}

is an affine plane.

Finite Laguerre planes[edit]

minimal model of a Laguerre plane (only 4 of 8 cycles are shown)

The following incidence structure is a “minimal model” of a Laguerre plane:

Hence

|P|=6{displaystyle |{mathcal {P}}|=6}

and

|Z|=8 .{displaystyle |{mathcal {Z}}|=8 .}

For finite Laguerre planes, i.e.

|P|<{displaystyle |{mathcal {P}}|

, we get:

Lemma:
For any cycles

z1,z2{displaystyle z_{1},z_{2}}

and any generator

P¯{displaystyle {overline {P}}}

of a finite Laguerre plane

L:=(P,Z,){displaystyle {mathcal {L}}:=({mathcal {P}},{mathcal {Z}},in )}

we have:

For a finite Laguerre plane

L:=(P,Z,){displaystyle {mathcal {L}}:=({mathcal {P}},{mathcal {Z}},in )}

and a cycle

zZ{displaystyle zin {mathcal {Z}}}

the integer

n:=|z|1{displaystyle n:=|z|-1}

is called order of

L{displaystyle {mathcal {L}}}

.

From combinatorics we get

Lemma:
Let

L:=(P,Z,){displaystyle {mathcal {L}}:=({mathcal {P}},{mathcal {Z}},in )}

be a Laguerre—plane of order

n{displaystyle n}

. Then

a) any residue

Miquelian Laguerre planes[edit]

Unlike Moebius planes the formal generalization of the classical model of a Laguerre plane, i.e. replacing

R{displaystyle mathbb {R} }

by an arbitrary field

K{displaystyle K}

, always leads to an example of a Laguerre plane.

Theorem:
For a field

K{displaystyle K}

and

Similarly to a Möbius plane the Laguerre version of the Theorem of Miquel holds:

Theorem of Miquel (circles drawn instead of parabolas)

Theorem of Miquel:
For the Laguerre plane

L(K){displaystyle {mathcal {L}}(K)}

the following is true:

If for any 8 pairwise not parallel points

(For a better overview in the figure there are circles drawn instead of parabolas)

The importance of the Theorem of Miquel shows in the following theorem, which is due to v. d. Waerden, Smid and Chen:

Theorem: Only a Laguerre plane

L(K){displaystyle {mathcal {L}}(K)}

satisfies the theorem of Miquel.

Because of the last theorem

L(K){displaystyle {mathcal {L}}(K)}

is called a “Miquelian Laguerre plane”.

The minimal model of a Laguerre plane is miquelian. It is isomorphic to the Laguerre plane

L(K){displaystyle {mathcal {L}}(K)}

with

K=GF(2){displaystyle K=GF(2)}

(field

{0,1}{displaystyle {0,1}}

).

A suitable stereographic projection shows that

L(K){displaystyle {mathcal {L}}(K)}

is isomorphic to the geometry of the plane sections on a quadric cylinder over field

K{displaystyle K}

.

Ovoidal Laguerre planes[edit]

There are many Laguerre planes that are not miquelian (see weblink below). The class that is most similar to miquelian Laguerre planes is the ovoidal Laguerre planes. An ovoidal Laguerre plane is the geometry of the plane sections of a cylinder that is constructed by using an oval instead of a non degenerate conic. An oval is a quadratic set and bears the same geometric properties as a non degenerate conic in a projective plane: 1) a line intersects an oval in zero, one, or two points and 2) at any point there is a unique tangent. A simple oval in the real plane can be constructed by glueing together two suitable halves of different ellipses, such that the result is not a conic. Even in the finite case there exist ovals (see quadratic set).

See also[edit]

References[edit]

External links[edit]

after-content-x4