Wannier equation – Wikipedia

before-content-x4

The Wannier equation describes a quantum mechanical eigenvalue problem in solids where an electron in a conduction band and an electronic vacancy (i.e. hole) within a valence band attract each other via the Coulomb interaction. For one electron and one hole, this problem is analogous to the Schrödinger equation of the hydrogen atom; and the bound-state solutions are called excitons. When an exciton’s radius extends over several unit cells, it is referred to as a Wannier exciton in contrast to Frenkel excitons whose size is comparable with the unit cell. An excited solid typically contains many electrons and holes; this modifies the Wannier equation considerably. The resulting generalized Wannier equation can be determined from the homogeneous part of the semiconductor Bloch equations or the semiconductor luminescence equations.

after-content-x4

The equation is named after Gregory Wannier.

Background[edit]

Since an electron and a hole have opposite charges their mutual Coulomb interaction is attractive. The corresponding Schrödinger equation, in relative coordinate

r{displaystyle mathbf {r} }

, has the same form as the hydrogen atom:

with the potential given by

after-content-x4

Here,

{displaystyle hbar }

is the reduced Planck constant,

{displaystyle nabla }

is the nabla operator,

μ{displaystyle mu }

is the reduced mass,

|e|{displaystyle -|e|}

(

+|e|{displaystyle +|e|}

) is the elementary charge related to an electron (hole),

εr{displaystyle varepsilon _{r}}

is the relative permittivity, and

ε0{displaystyle varepsilon _{0}}

is the vacuum permittivity. The solutions of the hydrogen atom are described by eigenfunction

ϕλ(r){displaystyle phi _{lambda }(mathbf {r} )}

and eigenenergy

Eλ{displaystyle E_{lambda }}

where

λ{displaystyle lambda }

is a quantum number labeling the different states.

In a solid, the scaling of

Eλ{displaystyle E_{lambda }}

and the wavefunction size are orders of magnitude different from the hydrogen problem because the relative permittivity

εr{displaystyle varepsilon _{r}}

is roughly ten and the reduced mass in a solid is much smaller than the electron rest mass

me{displaystyle m_{e}}

, i.e.,

μme{displaystyle mu ll m_{e}}

. As a result, the exciton radius can be large while the exciton binding energy is small, typically few to hundreds of meV, depending on material, compared to eV for the hydrogen problem.[1][2]

The Fourier transformed version of the presented Hamiltonian can be written as

where

k{displaystyle mathbf {k} }

is the electronic wave vector,

Ek{displaystyle E_{mathbf {k} }}

is the kinetic energy and

Vk{displaystyle V_{mathbf {k} }}

,

ϕλ(k){displaystyle phi _{lambda }(mathbf {k} )}

are the Fourier transforms of

V(r){displaystyle V(mathbf {r} )}

,

ϕλ(r){displaystyle phi _{lambda }(mathbf {r} )}

, respectively. The Coulomb sums follows from the convolution theorem and the

k{displaystyle mathbf {k} }

-representation is useful when introducing the generalized Wannier equation.

Generalized Wannier equation[edit]

The Wannier equation can be generalized by including the presence of many electrons and holes in the excited system. One can start from the general theory of either optical excitations or light emission in semiconductors that can be systematically described using the semiconductor Bloch equations (SBE) or the semiconductor luminescence equations (SLE), respectively.[1][3][4] The homogeneous parts of these equations produce the Wannier equation at the low-density limit. Therefore, the homogeneous parts of the SBE and SLE provide a physically meaningful way to identify excitons at arbitrary excitation levels. The resulting generalized Wannier equation is

where the kinetic energy becomes renormalized

by the electron and hole occupations

fke{displaystyle f_{mathbf {k} }^{e}}

and

fkh{displaystyle f_{mathbf {k} }^{h}}

, respectively. These also modify the Coulomb interaction into

where

(1fkefkh){displaystyle (1-f_{mathbf {k} }^{mathrm {e} }-f_{mathbf {k} }^{mathrm {h} })}

weakens the Coulomb interaction via the so-called phase-space filling factor that stems from the Pauli exclusion principle preventing multiple excitations of fermions. Due to the phase-space filling factor, the Coulomb attraction becomes repulsive for excitations levels

fke+fkh>1{displaystyle f_{mathbf {k} }^{mathrm {e} }+f_{mathbf {k} }^{mathrm {h} }>1}

ϕλL(k){displaystyle phi _{lambda }^{mathrm {L} }(mathbf {k} )}

and

ϕλR(k){displaystyle phi _{lambda }^{mathrm {R} }(mathbf {k} )}

, respectively. They are connected via the phase-space filling factor, i.e.

ϕλL(k)=ϕλR(k)/(1fkefkh){displaystyle phi _{lambda }^{mathrm {L} }(mathbf {k} )=phi _{lambda }^{mathrm {R} }(mathbf {k} )/(1-f_{mathbf {k} }^{mathrm {e} }-f_{mathbf {k} }^{mathrm {h} })}

. The left- and right-handed eigenstates have the same eigen value

Eλ{displaystyle E_{lambda }}

(that is real valued for the form shown) and they form a complete set of orthogonal solutions since

The Wannier equations can also be generalized to include scattering and screening effects that appear due to two-particle correlations within the SBE. This extension also produces left- and right-handed eigenstate, but their connection is more complicated[4] than presented above. Additionally,

Eλ{displaystyle E_{lambda }}

becomes complex valued and the imaginary part of

Eλ{displaystyle E_{lambda }}

defines the lifetime of the resonance

λ{displaystyle lambda }

.

Physically, the generalized Wannier equation describes how the presence of other electron–hole pairs modifies the binding of one effective pair. As main consequences, an excitation tends to weaken the Coulomb interaction and renormalize the single-particle energies in the simplest form. Once also correlation effects are included, one additionally observes the screening of the Coulomb interaction, excitation-induced dephasing, and excitation-induced energy shifts. All these aspects are important when semiconductor experiments are explained in detail.

Applications[edit]

Due to the analogy with the hydrogen problem, the zero-density eigenstates are known analytically for any bulk semiconductor when excitations close to the bottom of the electronic bands are studied.[5] In nanostructured[6] materials, such as quantum wells, quantum wires, and quantum dots, the Coulomb-matrix element

Vk{displaystyle V_{mathbf {k} }}

strongly deviates from the ideal two- and three-dimensional systems due to finite quantum confinement of electronic states. Hence, one cannot solve the zero-density Wannier equation analytically for those situations, but needs to resort to numerical eigenvalue solvers. In general, only numerical solutions are possible for all semiconductor cases when exciton states are solved within an excited matter. Further examples are shown in the context of the Elliott formula.

See also[edit]

References[edit]

  1. ^ a b Haug, H.; Koch, S. W. (2009). Quantum Theory of the Optical and Electronic Properties of Semiconductors (5th ed.). World Scientific. p. 216. ISBN 9812838848.
  2. ^ Klingshirn, C. F. (2006). Semiconductor Optics. Springer. ISBN 978-3540383451.
  3. ^ Kira, M.; Koch, S.W. (2006). “Many-body correlations and excitonic effects in semiconductor spectroscopy”. Progress in Quantum Electronics 30 (5): 155–296. doi:10.1016/j.pquantelec.2006.12.002.
  4. ^ a b Kira, M.; Koch, S. W. (2011). Semiconductor Quantum Optics. Cambridge University Press. ISBN 978-0521875097.
  5. ^ Ashcroft, Neil W.; Mermin, N. David (1976). Solid State Physics. Holt, Rinehart and Winston. ISBN 0-03-083993-9.
  6. ^ Paul Harrison (26 September 2011). Quantum Wells, Wires and Dots: Theoretical and Computational Physics of Semiconductor Nanostructures. John Wiley & Sons. ISBN 978-1-119-96475-9.


after-content-x4